Includes: 1x Bitmain Antminer A3 Sicoin Miner, 815 GH/s ±7% 1x APW3++ Power Supply Unit
1. The power cord is not included, please find one with at least 10A from your local market. 2. The APW3++ can deliver a maximum power of only 1200W if it is connected to a 110V mains power supply. To obtain the rated power of 1600W, the APW3++ must be connected to a 220-240V mains power supply. Please check the mains power supply that is the standard in your region before ordering. *Keep all original packaging for warranty purposes.
2. Specifications and other information of the Antminer A3 are as mentioned below.
3. Please select the correct address for shipping before you submit your order because, for this batch, the shipping address cannot be changed after the order has been submitted.
4. Separate power supply to control board: there is one additional six-pin PCIe connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner only after all the 10 PCIe connectors are connected to a power supply.
|
Parameters of ANTMINER A3 |
||
| No. |
Parameters |
Value |
| 1 |
Product model |
A3 |
| 2 |
Hashing algorithm |
Blake(2b) |
| 3 |
Total quantity of hash chips |
180 chips |
| 4 |
Total quantity of hash boards |
3 boards per miner |
| 5 |
Total hash rate |
815GH/s±5% |
| 6 |
DC voltage input |
11.60~13.00 V |
| 7 |
DC current input @12V DC |
98.8 A +7% |
| 8 |
DC Power @12V DC input |
1186 W +7% |
| 9 | 220VAC Power @25℃ ,93%
conversion efficiency of APW3 |
1275 W +7% |
| 10 | 220VAC Power efficiency @25℃,93% conversion efficiency of APW3 |  1.56mJ/MH+7% |
| 11 |
Weight（without package） |
 4.2 kg |
|
12 |
Operation temperature |
0-40 ℃ |
| 13 |
Storage temperature |
-40-85 ℃ |
| 14 |
Operation humidity |
5%RH-95%RH,
prevent condensation |
| 15 |
Noise |
76 dB |
| 16 |
Networking connection mode |
Ethernet Cable |
|
17 |
Power connection mode |
All three PCI-E ports are required to power the board. You can use one PSU to power multiple boards, but do not attempt to power one board with two PSUs.We suggest to prevent the control board to be powered up before hash boards be powered up. |
| 18 |
Size(Length*Width*Hight,without package) |
321mm*125mm*208mm |
Reviews
There are no reviews yet.